Buy Innosilicon A10 Pro 7GB (750Mhs)



Manufacturer Innosilicon
Model A10 Pro+ ETH (750Mh)
Also known as A10 PRO-S 7GB ETHMiner
Release December 2020
Size 136 x 285 x 362mm
Weight 8100g
Noise level 75db
Fan(s) 2
Power 1350W
Voltage 12V
Memory 7Gb
Temperature 5 – 45 °C
Humidity 5 – 95 %

In stock

Add to Wishlist
Add to Wishlist


Innosilicon a10 pro

The innosilicon A10 Pro is an enhanced version of the ETH miner from Innosilicon, it has been improved in such a way that the device now comes with an increased memory capacity of 5GB, as well as an improved hash rate and even a higher energy efficiency level. What makes this miner outstanding is its performance, the fact that it works with a hash rate of 720MH/s on the Ethash algorithm, which is suitable for mining ETH and 19 other altcoins. More so, it is however important to mention the level of Power consumption that accompanies the innosilicon a10 pro, its power consumption is 1300W, its energy efficiency also operates at 1.8 j/MH, and also a wall power consumption of 860W (+/- 10 %).

Innosilicon A10 is one of the most powerful Ethash ASIC devices available, which means that this device is 2 times more effective than an ordinary mining rig. Moreover, you must keep in mind, that it takes a lot of time and effort to build a mining rig, and if at some point any mining rig is built from used hardware then the price would be about the same as for Innosicilon A10 pro. The Innosilicon A10 Pro miner weighs 8.1 kg, and at the same time, the device takes up much less space than a mining farm with similar power. Mind you, this machine will continue to bring you the best mining experience with unparalleled computing power than any miner out there would.

Innosilicon a10

Apparently, the innosilicon a10 pro miner is equipped with two coolers that help in ensuring a proper cooling of the machine, this Pro mining machine is a single-tube design, and it uses those two parallel fans to provide heat dissipation for the hash rate board. Also, when it comes to the operation of this device, there seems to be a connection between the hash-rate board and the control board by a flat cable, and if you observe closely you get to realize that there is a number of wires which shows that there are three built-in hash rate boards.

However, during operation, the innosilicon a10 pro emits a fairly loud sound exceeding about 70 dB, and Prolonged exposure to this noise level, might lead to health problems, so a separate room should be allocated for the miner. Also, the high noise level of this machine does not allow the miner to be used in living spaces, and this miner with its lineup is considered the most profitable cryptocurrency miner after Bitmain antminer z15. However, in order for the innosilicon a10 pro to function correctly, the appliance must be properly cooled and a dust filter must be installed, and the AC voltage should be at least 210 watts, while the input current of the power supply should be about 10A.

Innosilicon A10 Pro Profitability

The Innosilicon A10 Pro is considered to be a mighty Ethash profitability miner, with a very high and better hash rate and efficiency than any of the market competitors. It also has a few advantages as one of the market’s mines with a meager operation cost, high ROI, and longevity. The Innosilicon A10 Pro will continue to bring you an optimal mining experience with unbeatable computing power when purchased, as it is considered to be among the top ten ASIC miners with a 21 USD profit per day. When it comes to the profitability of this miner, there’s a profit ratio of 877 percent with an annual return percentage of 140 percent.

The profitability income per day is attained to be around $11.32, including the electricity expense. While monthly, this miner can work on total profitability of $339.62, including the income spent on electricity, and lastly, the innosilicon a10 pro can stand at a profit of $4,075.42.But you should be aware that this profitability can also be affected by the price of Ethereum in the market, and what you should be paying attention to the most is the electricity rates in your area, which means that these rates have to be standard for you to enjoy the full benefits of this miner.

Innosilicon a10 For sale

We have the innosilicon A10 pro available for sale in very limited stock. All our miners come with a guarantee and insurance. We offer worldwide shipping, so you have nothing to worry about. No matter your location, we will have your miner sent to you without any issues. Shipping is done 48hours after confirmation of payment which can be done via any major crypto. We are official resellers of the innosilicon miners. Order your innosilicon a10 pro today before stocks run out.